| |
Electric Drive R.O. WaterMaker Kit | 
Proudly made
in the USA |
This electrically driven RO system features a high efficiency electrical motor, which greatly reduces the starting requirements. As a result, this kit can be operated from either the ship's generator set or from a 2.5 kw squarewave inverter (50 or 60 Hz).
- High pressure pump with aluminum-nickel bronze (or optional stainless steel upgrade) pump head with lifetime limited warranty to original non-commercial marine purchaser. Rubber studded mounting feet for vibration isolation.
- Custom high efficiency low starting current, 1 1/2 or 2 hp 120v AC/DC or 1 1/2 hp 12 volt DC electric motor
- Custom bell housing, (direct couples the high pressure pump to the electric motor) & Delron non-corrosive shaft coupling.
- 1000 psi certified filament wound fiberglass RO membrane housing with Super Austenitic stainless steel end plugs, mounting brackets and a lifetime limited warranty to the original non-commercial marine purchaser.
- Stainless steel Control Panel including flow meters, hour meter, stainless pressure gauge, manual stainless regulator valve, three-way selector valve, overload circuit breaker, safety stainless high pressure switch and indicator light.
- Thin film, spiral wound 1000 psi, 50,000 ppm high rejection (99.5%), heavy duty RO membrane(s) including one pound of cruising membrane preservative.
- Prefilters (5 and 20 micron) with clear housing & stainless mounting brackets.
- 120 volt boost pump.
- Safety aluminum-nickel bronze low pressure switch and service wrench.
- 20' nylon lined high pressure hose with reusable fittings.
- 10' heavy duty white reinforced feed water hose and fittings.
- 15' heavy duty red polyethylene brine water discharge tubing and fittings.
- 15' FDA approved blue polyethylene product water tubing and fittings.
- 3/8" inline check valve for product water tubing.
- Miscellaneous fittings, screws, hose mounts, etc.
- Set of installation diagrams and instructions.
- Toll Free assistance line for installs or technical support.
| DUTY FREE TO CANADA SIZE OPTIONS DUTY FREE TO CANADA |
| SIZE * |
AMPS@120V |
SIZE * |
AMPS@120V |
| 8 GPH |
18 1/2 |
40 GPH |
18 1/2 |
| 12 GPH |
18 1/2 |
62 GPH |
22 1/2 |
| 18 GPH |
18 1/2 |
113 GPH |
35 1/2 |
| 24 GPH |
18 1/2 |
250 GPH |
48 at 230V |
* The above flow rates are based on a TDS of 36,000 ppm at 78 degrees F.
Flow rates are +/-5%
|
MISCELLANEOUS OPTIONS
|
| ELECTRIC FLUSH KIT |
|
HIGH PRESSURE WASH DOWN KIT (SALT & FRESH WATER) WITH 25FT. OF 2000 PSI NON MARKING DECK HOSE |
|
12 VOLT D.C. OR 120 VOLT A.C. UV STERILIZER UNIT WITH S/S LINER (FOR SHIP'S TANK)
|
|
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS
|
|
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS PER CASE OF (30) $60 SAVINGS PER CASE
|
|
PANEL MOUNTED AUTOMATIC SALINITY MONITOR & TANK/OVERBOARD VALVE
|
|
PORTABLE HAND HELD SALINITY MONITOR
|
|
316 STAINLESS STEEL PUMP HEAD (62 GPH MAX.)
|
| UPGRADE S/S PANEL FROM 32 GPH TO 62 GPH CAPACITY
|
|
ADDITIONAL MEMBRANE MODULE(S) FOR HIGHER PRODUCTION |
 |
 |
 |
|
| Boost Pump & Pre-Filters |
Hi Pressure Pump & Custom Motor |
Reverse Osmosis Membrane Module |
Control Panel |
Other photos of this kit and some examples of customer installations are available.  .
Website and all contents copyright, © 1996-2005, by AquaMarine, Inc. All Rights Reserved
Please review legal terms and conditions of use by clicking here.
PO Box 55, Deer Harbor, WA 98243-0055 USA
Ph: 1-800-376-3091 or (360) 376-3091 fax: (360) 376-3243
All rights reserved.
|
