| |
Belt Drive R.O. WaterMaker Kit | 
Proudly made
in the USA |
This kit is designed to be belt driven from the main engine or generator set. The kit comes complete with all necessary items except the mounting bracket to attach to the engine. While bulkhead mounting of the high pressure pump is possible, we strongly recommend a mounting bracket that is directly attached to the engine or generator set. Custom stainless steel mounting brackets are available for Westerbeke generator sets. (This kit does not include additional pulleys for your main engine. Contact AquaMarine or your nearest engine supplier.)
- Standard high pressure pump with aluminum-nickel bronze (or optional stainless steel upgrade) pump head with liletime limited warranty to original non-commercial marine purchaser.
- 12 volt DC clutch, dual or single sheave, connected to high pressure pump.
- 1000 psi certified filament wound fiberglass RO membrane housing with Super Austenitic stainless steel end plugs, mounting brackets and a lifetime limited warranty to the original non-commercial marine purchaser.
- Stainless steel Control Panel including flow meters, hour meter, stainless pressure gauge, manual stainless regulator valve, three-way selector valve, overload circuit breaker, safety stainless high pressure switch and indicator light.
- Prefilters (5 and 20 micron) with clear housing & stainless mounting brackets.
- Thin film, spiral wound 1000 psi, 50,000 ppm high rejection (99.5%), heavy duty RO membrane(s) including one pound of cruising membrane preservative.
- Safety aluminum-nickel bronze low pressure switch and service wrench.
- 20' nylon lined high pressure hose with reusable fittings.
- 10' heavy duty white reinforced feed water hose and fittings.
- 15' heavy duty red polyethylene brine water discharge tubing and fittings.
- 15' FDA approved blue polyethylene product water tubing and fittings.
- 3/8" inline check valve for product water tubing.
- Miscellaneous fittings, screws, hose mounts, etc.
- Set of installation diagrams and instructions.
- Toll Free assistance line for installs or technical support.
| DUTY FREE TO CANADA SIZE OPTIONS DUTY FREE TO CANADA |
| SIZE * |
H.P. |
SIZE * |
H.P. |
| 8 GPH |
1 1/2 Hp |
40 GPH |
1 1/2 Hp |
| 12 GPH |
1 1/2 Hp |
62 GPH |
2 Hp |
| 18 GPH |
1 1/2 Hp |
113 GPH |
3 Hp |
| 24 GPH |
1 1/2 Hp |
250 GPH |
6 1/2 Hp |
* The above flow rates are based on a TDS of 36,000 ppm at 78 degrees F.
Flow rates are +/-5%
* Your cruising RPM is required to properly design your RPM window.
|
MISCELLANEOUS OPTIONS
|
| ELECTRIC FLUSH KIT |
|
PANEL MOUNTED AUTOMATIC SALINITY MONITOR & TANK/OVERBOARD VALVE
|
|
12 VOLT D.C. OR 120 VOLT A.C. UV STERILIZER UNIT WITH S/S LINER (FOR SHIP'S TANK)
|
|
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS
|
|
SPARE 5 MICRON / 20 MICRON PRE-FILTER ELEMENTS PER CASE OF (30) $60 SAVINGS PER CASE
|
|
HIGH PRESSURE WASH DOWN KIT (SALT & FRESH WATER) WITH 25FT. OF 2000 PSI NON MARKING DECK HOSE |
|
PORTABLE HAND HELD SALINITY MONITOR
|
|
316 STAINLESS STEEL PUMP HEAD (62 GPH MAX.)
|
| UPGRADE S/S PANEL FROM 32 GPH TO 62 GPH CAPACITY
|
|
ADDITIONAL MEMBRANE MODULE(S) FOR HIGHER PRODUCTION |
 |
 |
 |
|
| Boost Pump & Pre-Filters |
High Pressure Pump |
Reverse Osmosis Membrane Module |
Control Panel |
Other photos of this kit and some examples of customer installations are available.  .
Website and all contents copyright, © 1996-2005, by AquaMarine, Inc. All Rights Reserved
Please review legal terms and conditions of use by clicking here.
PO Box 55, Deer Harbor, WA 98243-0055 USA
Ph: 1-800-376-3091 or (360) 376-3091 fax: (360) 376-3243
All rights reserved.
|
